Design: Short Wheel Base - Rear Suspension Steering: Above Seat Wheelbase: 39" Seat Height: 23" (1) BB Height: 25" (1) Head Tube Angle: 73 deg Seat Back Angle: 50 deg Weight: Guessed to be 35 lb Suspension: Swing arm suspension with large rubber bumper for spring. Frame: CrMo Fork: CrMo Track Fork Blades Construction: Fillet Brazed Fillet Brazed Seat: Two Piece Plywood "Easy Racer" Molded Fiberglass (2) Deraileurs: Shimano 5 speed Double Chain Ring Rear Wheel: Phil Wood 5 speed Hub 20" 451 rim 36 Phil Wood - laced 3 cross Front Wheel: Phil Wood Hub 20" 451 rim 36 Phil Wood - laced 3 cross Tires: 20x1 1/8 - IRC Crank: Shimano Dura Ace Brakes: Campagnola side pull Paint: Rattle Can - Blue Rider Adjustment: Boom

(1) The seat and bottom bracket heights are a initially built. Due to a problem with interference between the crank and front wheel the seat and bottom bracket were moved forward 6". This raised the seat and bottom bracket about an inch.

(2) When initially completed the seat was from two pieces of plywood and foam. Later a fiberglass seat from Easy Racers was installed.

back to Recumbent Cycles